Easy to fit industrial roller shutter doors

Traditional industrial roller shutter doors are designed to suit industrial and commercial premises. All doors operate by either manual lift up, hand chain or single phase electric motors, which guarantees a smooth performance. They are constructed of specially designed concave interlocking 75mm galvanised steel slats. Manufactured to the highest standard using the best quality materials with heavy duty section bottom rails that provides added strength to each door. A full range of powder coat (BS or RAL standard) finishes to most applications ensure an attractive quality coloured finish that blends in with any building's decor.

Bottom Rail Locking System:
For manual spring & lock operated shutters a central key lock is attached to the bottom rail slat as standard. Alternatively, two high security bullet locks are positioned on each guide runner rail. The central lock is built-in to the shutters bottom rail that is attached to the shutters curtain thus travels up and down with the shutter. Locking bars locate in pre-drilled slots in each side of the shutters guide rails, giving maximum security. With this type of lock it allows the shutter to be locked or unlocked from inside or out.

All our doors, gates and window bars are fully compliant to BS EN 1324 1-1 (Industrial, Commercial, Garage Doors and Gates:-Product Standard) and CE Marked against the Construction Products Directive and also the Machinery Directive, a mandatory requirement in the UK.

 http://www.arrowsecurityshutters.co.uk/