Arrow Security Shutters

Roller shutter parts and accessories

2011-07-25T02:45:00.000-07:00

Plastic Hand Chain Wheel
Ref: ARR564NV
Diameter Wheel: 180mm
Diameter Tooth Sprocket: 70mm
Diameter Centre Shaft:: 25mm
Number of Teeth: 12

Hand Chain (Zinc-Plated)
Ref: ARR565NV
Size: 5.5mm
Used On: Plastic Chain wheels
Used On: Steel Chain wheels

Hand Chain Guide
Ref: ARR617PP
Chain Guide: 7"
Used With Ref: ARR564NV
Used With Ref: ARR585NV
Used With Ref: ARR585PK

Hand Chain Keep
Ref: ARR565PK
Type: Hand chain locking keep
Dimensions: W 90 / H 50 / D 25
Security: Padlockable.
(Padlock not inc)

http://www.arrowsecurityshutters.co.uk/

roller shutter parts and accessories part 15

2011-07-18T02:59:00.000-07:00

Galvanised Steel Guide Rail
Ref: ARR561AL
Dimensions: 50mm x 32mm
Delivery: 2 / 5 days
Price Per Metre
How To Order:
1.) Enter cut length of each individual rail and how many required in the additional Information box when you Add To Cart. (Example 2 @ 2457mm)
2.) In the Quantity box enter the round up to next full metre. (example 2 @ 2457mm enter 6)

Galvanised Steel Angle
Ref: ARR562AL
Dimensions: 75mm x 50mm x 3mm
Delivery: 2 / 5 days
Price Per Metre
How To Order:
1.) Enter cut length of each individual angle and how many required in the additional Information box when you Add To Cart. (Example 2 @ 2457mm)
2.) In the Quantity box enter the round up to next full metre. (example 2 @ 2457mm enter 6)

Shutter Cover Box hood
Ref: ARR563P
Size: 300mm x 300mm x 150mm
Delivery: 2 / 5 days
Price Per Metre
How To Order:
1.) Enter cut length of each individual hood and how many required in the additional Information box when you Add To Cart. (Example 2 @ 2457mm)
2.) In the Quantity box enter the round up to next full metre. (example 2 @ 2457mm enter 6)

Mild Seel Roller Tube
Ref: ARR563AL
Size: 4" 16gauge
Delivery: 2 / 5 days
Price Per Metre
How To Order:
1.) Enter cut length of each individual tube and how many required in the additional Information box when you Add To Cart. (Example 2 @ 2457mm)
2.) In the Quantity box enter the round up to next full metre. (example 2 @ 2457mm enter 6)

http://www.arrowsecurityshutters.co.uk/

roller shutter parts and accessories part 14

2011-07-11T02:52:00.000-07:00

Galvanised Steel Solid Slats
Ref: ARR557AL
Size:75mm (3") 22 gauge
Delivery: 2 / 5 days

Galvanised Perforated Slats
Ref: ARR558AL
Size:75mm (3") 22 gauge
Delivery: 2 / 5 days

T-Rail Bottom Section
Ref: ARR559AL
Dimensions: H 69 / D 74
Delivery: 2 / 5 days

L-Rail Bottom Section
Ref: ARR560AL
Dimensions: H 88 / D 31
Delivery: 2 / 5 days

http://www.arrowsecurityshutters.co.uk/

roller shutter parts and accessories part 13

2011-07-04T03:45:00.000-07:00

Plastic 3" End-Locks (White)
Ref: ARR553AS
Handed: Left & Right
Quantity: 20 Left / 20 Right
Rivets: Not inc.

Plastic 3" End-locks (Black)
Ref: ARR554NV
Handed: Left & Right
Quantity: 20 Left / 20 Right
Rivets: Not inc.

Steel 3" End-Locks
Ref: ARR555AL
Handed: Left & Right
Quantity: 20 Left / 20 Right
Rivets: Not inc.

Rivets (Unigrip)
Ref: ARR556B
Size: 4.8 x 15
Finish: Aluminium
Quanity: 80

http://www.arrowsecurityshutters.co.uk/

Roller shutter parts and accessories part 12

2011-06-27T08:09:00.000-07:00

T - Rail Rubber Seal
Ref: ARR549F
Fixing: Clip-On To T-Rail
Use With Ref: ARR559AL
Price Per Metre

B - Rail Rubber Seal
Ref: ARR550F
Fixing: Inc. Steel fixing carrier
Use: Attach to any rail
Price Per Metre

D - Bottom Rail Rubber Seal
Ref: ARR551F
Fixing: Double Sided Stick Tape
Use With: Any Rails
Price Per Metre

Guide Rail Brush Seal
Ref: ARR552F
PVC Carrier With Brush Insert
Fixing: Clip-On
3 Metre Length Supplied

http://www.arrowsecurityshutters.co.uk/

roller shutter parts and accesories part 11

2011-06-20T05:34:00.000-07:00

Spring Steel Attachment Strap (137mm)
Ref: ARR545SW
Total Length: 137mm
Width of 'T': 100mm
Fixing Strap Width: 20mm

Spring Steel Attachment Strap (180mm)
Ref: ARR546SW
Total Length: 180mm
Width of 'T': 100mm
Fixing Strap Width: 20mm

Spring Steel Attachment Strap (200mm)
Ref: ARR547SW
Total Length: 200mm
Width of 'T': 120mm
Fixing Strap Width: 20mm

Plastic Hinge Attachment Strap (Steel Hinge)
Ref: ARR548DV
Total Length: 173mm
Hinge Width: 38mm
Fixing Strap Width: 18mm

http://www.arrowsecurityshutters.co.uk/

Shop front roller shutter installation movie

2011-05-31T05:46:00.000-07:00

We have a new roller shutter installation animated movie!

How to measure for and how to fit a galvanised, electrical operated shop front roller shutter made by Libra Media.

You can see the video HERE
Enjoy!

http://www.arrowsecurityshutters.co.uk/

Roller shutter parts and accessories part 10

2011-05-23T07:58:00.000-07:00

Belt Cord
Ref: ARR541SW

Colour: Grey
Belt Width: 14mm

Belt Roller Brush
Ref: ARR542SW
Dimensions: W 37 / H 82 / D 18
Dimensions: W 22 / H 52 / D 18

Swivel Belt Winder
Ref: ARR543SW
Colour: White
Dimensions: W 127 / H 165 / D 22
Belt Cord: Not inc.

Geared Belt Winder
Ref: ARR544W
Colour: White
Dimensions: W 152 / H 120 / D 32
Belt Cord & Handle: Not inc.

http://www.arrowsecurityshutters.co.uk/

Roller shutter parts and accesories photo shoot

2011-05-16T03:10:00.000-07:00

Just wanted to tell everyone about our new look online shop for roller shutter parts and accessories in the UK.
We have had a professional photo shoot to show our security products and garage door products parts and accessories in all their glory.
Go to the security shutters site now by clicking below and then clicking on parts and accessories.
Thanks for reading, until next time!

http://www.arrowsecurityshutters.co.uk/

Roller shutter parts and accessories part 9

2011-05-09T03:40:00.001-07:00

Override Crank Handle
Ref: ARR537E

Type: Manual Winding handle.
Full Length: 1.2 Metres
Bar Thickness: 10mm

Electric Motor Rigid Eye
Ref: ARR538E

Type: Hexagonal Bar
Full Length: 250mm
Bar Thickness: 7mm

Electric Motor Drop Eye
Ref: ARR539E

Type: Round Hook
Full Length: 70mm
Bar Thickness: 25mm

Battery Back-Up
Ref: ARR540SW

Supply: PP450W ( With Transmitter)
Lift Capacity: Shutters Up To 3m x 3m
Cycles: 8 Complete Open and Close

http://www.arrowsecurityshutters.co.uk/

Roller shutter parts and accessories part 8

2011-05-03T05:11:00.000-07:00

Electric Tubular Motor (50Nm.)
Ref: ARR533E

Lift Capacity: Door Sizes upto 1M x 2M
Supply Voltage: 230v
Newtons: 50 N.m
Adaptors. 4" / 102mm
Cable Length: 2.5 metres
Mounting Bracket: Yes
Manual Override: No
Easy to set limit switches

Electric Tubular Motor (100Nm.)
Ref: ARR534E

Lift Capacity: Door Sizes upto 3M x 3M
Supply Voltage: 230v
Newtons: 100 N.m
Adaptors. 4" / 102mm
Cable Length: 2.5 metres
Mounting Bracket: Yes
Manual Override: Yes
Easy to set limit switches

Override Tubular Motor (100Nm.)
Ref: ARR535E

Lift Capacity: Door Sizes upto 3M x 3M
Supply Voltage: 230v
Newtons: 100 N.m
Adaptors. 4" / 102mm
Cable Length: 2.5 metres
Mounting Bracket: Yes
Manual Override: No
Easy to set limit switches

Override Tubular Motor (230Nm.)
Ref: ARR536E

Lift Capacity: Door Sizes upto 4M x 4M
Supply Voltage: 230v
Newtons: 230 N.m
Adaptors. 4" / 102mm
Cable Length: 2.5 metres
Mounting Bracket: Yes
Manual Override: Yes
Easy to set limit switches

http://www.arrowsecurityshutters.co.uk/

Roller shutter parts and accessories part 7

2011-04-26T04:52:00.000-07:00

Remote Receiver Unit (Includes two Transmitters)
Ref: ARR525E

Supply Voltage 230v
Controls On Unit: Up, Down, Stop
Curtesy Light: 40 watts
Remote Control Transmitters: 2
Dimensions: W 145 / H 290 / D 85
Use with Ref: ARR529E

Remote Receiver Unit (Garage Doors)
Ref: ARR526SW

Supply Voltage 230v
Controls On Unit: Up, Down, Stop
Curtesy Light: 40 watts
Remote Control Transmitters: Not Inc.
Dimensions: W 134 / H 200 / D 68
Use with Ref: ARR530SW

Remote Unit Basic (Includes two Transmitters)
Ref: ARR527E

Supply Voltage 230v
Controls Remote only
Curtesy Light: None
Remote Control Transmitters: 2
Dimensions: W 145 / H 195 / D 75
Use with Ref: ARR529E

Group Command For 4 shutters
Ref: ARR528SW

Type: 4 Way Group Controler
Supply Voltage: 230v
Switches: 24v DC
Operates: Up To Four Motors
Operation: From One Switch
Dimensions: W 235 / H 165 / D 90

http://www.arrowsecurityshutters.co.uk/

Roller shutter parts and accessories part 6

2011-04-18T05:36:00.000-07:00

Rocker Switch (Surface) :
Ref: ARR521SW

Type: Surface Mounted
Size Back Box: W 90 / H 90 / D 45
Size Face Plate W 78 / H 78 / D 18
Control : Up, Down, Stop

Rocker Switch (Flush) :
Ref: ARR522E

Type: Flush Mounted
Size Back Box: W 70 / H 70 / D 40
Size Face Plate: 78mm x 78mm x 18
Control : Up, Down, Stop

Double Switch :
Ref: ARR524G

Type: Operates 2 Shutters
Size Back Box: W 90 / H 90 / D 45
Size Face Plate W 78 / H 78 / D 18
Control : Up, Down, Stop

Wall Mounted Starter :
Ref: ARR523L

Type: Door Control Starter
Supply: Three Phase
Controls: Up, Down, Stop
Dimensions: W 68 / H 132 / D 54

http://www.arrowsecurityshutters.co.uk/

Roller shutter parts and accessories part 5

2011-04-11T03:17:00.000-07:00

Key Switch Surface-Mounted :
Ref: ARR517E

Type: Surface Mounted
Switch Rating: 230V ac. 32 amps
Dimensions: W 75 / H 75 / D 65
Security: Anti-Tamper
Control: Hold to run, off, up & Down
Keys Supplied: 3

Key Switch Flush-Mounted :
Ref: ARR518E

Type: Flush Mounted
Switch Rating: 230V ac. 32 amps
Dimensions: W 100 / H 125 / D 65
Security: Anti-Tamper
Control: Hold to run, off, up & Down
Keys Supplied: 3

Key Switch Security Housing :
Ref: ARR519NV

Type: Hinged unit
Finish: Galvanised Steel
Dimensions: W 97 / H 115 / D 97
Security: Padlockable
Use With Ref: ARR517E
(padlock not included)

Key Switch 16amp :
Ref: ARR520E

Type: Surface Mounted
Switch Rating: 230V ac. 16 amps
Dimensions: W 72 / H 72 / D 45
Security: Anti-Tamper
Control: Hold to run, off, up & Down
Keys Supplied: 3

http://www.arrowsecurityshutters.co.uk/

Roller shutter parts and accessories part 4

2011-04-04T05:53:00.000-07:00

Bottom Rail Slat Lock :
Ref: ARR512SW

Finish: Zink Plated Steel
Cylinder: Brass
Case Size: W 218 / H 31 / D 8
Cylinder diameter: 25mm
Lock throw: 32mm
Keys Supplied: 2

Gold Centre Lock :
Ref: ARR512J

Finish: Brass Plated Steel
Cylinder: Brass
Case Size: W 165 / H 38 / D 5
Cylinder diameter: 25mm
Lock throw: 20mm
Keys Supplied: 2

Ground Padlock :
Ref: ARR515M

Finish: Stainless Steel Armour Plating
Shackle Diameter: 11mm
Shackle Clearance W 30 / D 15
Lock size: W 80 / H 67 / D 28
Keys Supplied: 3
Used With Ref: ARR516M

Ground Anchor Unit :
Ref: ARR516M

Floor Socket: Brass Plated
Bolt release: Spring Cap
Bolt Diameter: 14mm
Socket Length: 83mm
Socket Diameter: 54mm
Used With Ref: ARR515M

http://www.arrowsecurityshutters.co.uk/

Roller shutter parts and accesories part 3

2011-03-28T05:19:00.000-07:00

Bottom Rail Centre Lock :
Ref: ARR509M

Finish: Zinc Plated Steel
Cylinder: Brass
Case Size: W 155 / H 55 / D 14
Cylinder diameter: 25mm
Lock throw: 23mm
Keys Supplied: 2

Handed Shutter Locks :
Ref: ARR510M

Finish: Zinc Plated Steel
Cylinder: Brass
Case Size: W 155 / H 55 / D 14
Cylinder diameter: 25mm
Lock throw: 23mm
Keys Supplied Pair Lock 2

Narrow Shutter Lock :
Ref: ARR511M

Finish: Zinc Plated Steel
Cylinder: Brass
Case Size: W 155 / H 55 / D 14
Cylinder diameter: 25mm
Lock throw: 20mm
Keys Supplied: 2

Ultra Narrow Shutter Lock :
Ref: ARR512M

Finish: Zinc Plated Steel
Cylinder: Brass
Case Size: W 200 / H 30 / D 10
Cylinder diameter: 23mm
Lock throw: 30mm
Keys Supplied: 2

http://www.arrowsecurityshutters.co.uk/

Roller shutter parts and accesories part 2

2011-03-21T08:06:00.000-07:00

Pinson Bullet Lock Housing
Ref: ARR505EV
Finish: Mild steel
Body Projection: 38mm
Body Length: 97mm
Used With Ref: ARR501EV

Viro Bullet Lock Housing :
Ref: ARR506EV
Finish: Mild Steel
Body Projection: 38mm
Body Diameter: 41mm
Used With Ref: ARR502EV

Round Head Lock Housing :
Ref: ARR507SW
Finish: Mild Steel
Body Projection: 51mm
Body Length: 97mm
Used With Ref: ARR503SW
Tessi Bullet Lock Housing :
Ref: ARR508M

Tessi Bullet Lock Housing :
Ref: ARR508M
Finish: Mild Steel
Body Projection:38mm
Body Diameter: 41mm
Used With Ref: ARR504M

http://www.arrowsecurityshutters.co.uk/

Roller shutter parts and accessories part 1

2011-03-14T06:23:00.000-07:00

Pinson bullet locks: (Brass) are keyed alike, off the shelf, so if you order more than one pair then the same key will operate all the locks.

Viro Brass bullet locks: are keyed alike, off the shelf, so if you order more than one pair then the same key will operate all the locks.

Round Head bullet locks: are keyed alike, off the shelf, so if you order more than one pair then the same key will operate all the locks.

Bayonet Bullet locks: are keyed alike, off the shelf, so if you order more than one pair then the same key will operate all the locks.

http://www.arrowsecurityshutters.co.uk/

Sectional Overhead Doors

2011-03-07T05:39:00.000-08:00

Sectional Overhead Doors give guaranteed high thermal performance avoiding cold bridging.

Insulated Sectional Overhead Door panels have a thermal performance that is greater than required by building regulations.

Windows can be installed in single or multiple panels

Panels can be prefinished in an extensive range of colours and materials

INDIVIDUALLY DESIGNED FOR EACH DOOR OPENING:

■Electric 3 ph or 1 ph operators complete with starter.
■Chain hoist driven operated.
■Manual Push-up operated.
■Standard lift, high lift, vertical lift and low headroom track configurations. Follow the roof and pitched tracks available.
■Doors supplied with adjustable side hinges, intermediate hinges, nylon rollers, cable sets, bottom corner brackets, spring bumpers, self tapping panel fixings.
■All components galvanised for weather protection.
■Bolted and riveted system so galvanising is not compromised.
■Highest grade springs to DN 17223 Sort C specification.
■Safety Systems include spring brake device.

SPECIFICATION:

The door panel provides the overall insulated Sectional Overhead Door assembly with its main characteristics

COMPOSITION:

The use of quality materials and precise manufacturing controls ensure long service life in normal industrial and commercial applications. All Insulated Door Panels conform to the Building Regulations requirements for Industrial Doors. Available in a wide range of durability finishes.

OUTER AND INNER SHEET:

0.5mm hot-dipped galvanised steel to BS EN 10147:1992 (specification for continuously hot-dip zinc-coated structural steel sheet and strip) grade Fe E220G coating weight 275g/m2

CORE:

0.5mm hot-dippe39mm thick rigid polyurethane foam, density 40kg/m3
THERMAL PERFORMANCE:

The 1995 edition of Building Regulations Approved Document L ‘Conservation of Fuel and Power’ defines the ‘U’ value requirement for Vehicle Access and similar Large Doors as 0.7 W/m2K. The document states that thermal bridges should be taken into account when calculating ‘U’ values. The thermal performance of standard 610mm wide and 40mm thick Insulated Door Panels, including the effect of thermal bridges as panel to panel joint, has been calculated by the finite element method giving a ‘U’ value of 0.60 W/m2K.

COLOURS & FINISHES:

The outer skin can be finished in British Steel’s HPS200, Pvf2 or in a architectural polyester. HP200 colours have a scintilla finish, Pvf2 and polyester finishes are all stucco embossed as standard.

The Internal inner skin is finished in white polyester coated stucco embossed galvanised steel as standard.

The stucco Embossed 0.7mm thick aluminium outer and inner panel is available which has the benefit of reducing weight but with the same insulation properties.

FIRE RESISTANCE:

The facing materials used on Composite Panels, when tested independently have a class 1 surface spread of flame to BS 476: Part 7: 1971 and class 0 as defined by the Building Regulations 1985.

ACOUSTICS:

The 40mm insulated door panel gives sound reduction of (rw) 25db. Please note: this is for the panel only and does not include joints, i.e. a fully installed door.

PANEL OPTIONS & ACCESSORIES:

A range of windows in various sizes can be incorporated in the panel, the standard being 600mm x 300mm with radiused corners. Each panel is fitted with pre punched galvanised steel end caps and the top and bottom panels are finished with an aluminium retainer which holds the top and bottom EPDM seals.

http://www.arrowsecurityshutters.co.uk/

Fire shutters part 2

2011-02-28T04:51:00.000-08:00

...continuation of part 1
FUSIBLE LINK RELEASE MECHANISM:

A soldered link designed to melt at 680C separates and releases the clutch on the electrically operated shutters, putting the shutter into fire mode making it close. On activation of the release mechanism, the shutter’s rate of descent is controlled through the gears being constantly engaged. The rate of descent is approximately 100mm per second. The clutch can be reset and the door can then be raised and lowered in the normal fashion. The motor unit has a facility to simulate a fire test via a pull and reset cord.

AUTOMATIC RESET SOLENOID RELEASE MECHANISM (FIRE ALARM SYSTEM):

The auto reset solenoid release designed to be connected to the fire alarm system. Upon receipt of a 24 volt 0.5amp signal the clutch will disengage allowing the door to close under controlled descent. When the door is returned to open position after removal of the fore signal the solenoid will re-set itself automatically. This is commonly used and ideal for frequent testing.

3 PHASE OPERATORS:

415 Volt, 3-phase, 50 Hz neutral and earth rated at 10 amps per phase.

SINGLE PHASE OPERATORS:

240 Volts, 50 Hz rated at 13 amps (motor fuses)

AVAILABLE FINISHES:

All mild steel surfaces receive one coat of black rust inhibiting primer paint. All galvanised steel is manufactured to BS EN 10142 designation FeP02 G Z275 NA (same as BS 2989 designation Z2 G N and ASTM A527) and BS EN 10143, hot dip galvanised with a zinc coating of 275g/m2
and comes with a normal spangle finish. Paint finish available using a polyester powder coating system (minimum DFT 50 microns, average DFT 70 microns) to our standard RAL or BS Colours. (See powder coat colour page)

http://www.arrowsecurityshutters.co.uk/

Fire security shutters part 1

2011-02-21T04:44:00.000-08:00

OPERATION: This shutter has a soldered fusible link designed to melt at 68 degrees centre grade in a fire condition separating and releasing the shutter curtain allowing the shutter to close in a controlled manner. Testing of the door is done manually as is opening and closing the door, using a 418-volt 3- phase 50Hz motor drive. Emergency operation is via a manual hand chain.

CURTAIN: Constructed from solid 75mm curved galvanized steel interlocking lath sections manufactured to BS EN 10142 and BS EN 10143 with a zinc coating of 275g/m2 complete with zinc-plated mild steel end locks Curtain is available in 20swg (0.91mm) or 18swg (1.22mm) finished at the bottom with a galvanised steel ‘T’ shaped bottom rail.

GUIDES: Constructed from 65mm or 102mm x 32mm x 3mm thick galvanised steel channel manufactured to BS EN 10142 and BS EN 10143 with a zinc coating of 275g/m2, complete with splayed tops, bolted to 75mm x 50mm x 6mm thick continuous mild steel angle sections manufactured to BS4848 part 4, complete with 12mm x 50mm slotted fixing holes positioned at 550mm maximum centres.

HOODS: Constructed from 20swg (0.91mm thick) galvanised steel sheet manufactured to BS EN 10142 and BS EN 10143 with a zinc coating of 275g/m2, and fitted with hood support brackets constructed from mild steel angle sections manufactured to BS 4848 part 4 and finished with a zinc-rich primer paint as standard. The hood brackets support the hood and help to provide a fire seal at the head in the event of a fire. The number of support brackets used is determined by the width and fire resistance of the shutter.

BARREL: Constructed from high quality mild steel tube manufactured to BS EN 10219. Overall size of the tube varies to suit the width of the opening and weight of the shutter curtain. Tube wall thickness varies depending on the size of the shutter from 3.2mm to 19mm to achieve minimum deflection and a safety factor of 2. Barrels come complete with tempered steel helical torsion springs manufactured using hard drawn wire to BS 5216mounted on bright steel shafts of various diameters from25mm to 50mm

SHAFT: Shafts are held in place using mild steel bearing blocks incorporating high-speed bearings to ensure concentric rotation.

http://www.arrowsecurityshutters.co.uk/

Easy to fit expandable barriers

2011-02-14T04:53:00.000-08:00

The Expandable Barrier System is ideal for access control and security in shopping centres, factory units, car parks, loading bays, warehouses, sports facilities or simply partitioning. This innovative arrangement is completely trackless, operating on a series of steel reinforced trolleys that allow complete mobility. Spanning any width and up to a maximum height of 2.5 metres, it can be temporarily fixed in place with shoot bolts locking each trolley into the floor, for optimum security. Locking devices on the end posts allow them to be effectively secured to the walls. finished in a resilient white gloss coating.

http://www.arrowsecurityshutters.co.uk/

Fixed window bars and mesh grills

2011-02-07T03:43:00.000-08:00

Fixed window bars and mesh grills are ideal for high security domestic and commercial applications when removal of the security device is not required. Constructed from steel the mesh is available in either a diamond or square pattern. The Frame will be constructed as follows: 25mm flat steel when face fixing to an opening. 25mm x 25mm steel angle is used when reveal fixing to an opening. Flat or angle can be mixed on the same grille. Standard colour is White RAL 9010 or they can be powder coated to our range of standard stock RAL or BS colours.

http://www.arrowsecurityshutters.co.uk/

Easy to fit industrial roller shutter doors

2011-01-31T06:36:00.000-08:00

Traditional industrial roller shutter doors are designed to suit industrial and commercial premises. All doors operate by either manual lift up, hand chain or single phase electric motors, which guarantees a smooth performance. They are constructed of specially designed concave interlocking 75mm galvanised steel slats. Manufactured to the highest standard using the best quality materials with heavy duty section bottom rails that provides added strength to each door. A full range of powder coat (BS or RAL standard) finishes to most applications ensure an attractive quality coloured finish that blends in with any building's decor.

Bottom Rail Locking System:
For manual spring & lock operated shutters a central key lock is attached to the bottom rail slat as standard. Alternatively, two high security bullet locks are positioned on each guide runner rail. The central lock is built-in to the shutters bottom rail that is attached to the shutters curtain thus travels up and down with the shutter. Locking bars locate in pre-drilled slots in each side of the shutters guide rails, giving maximum security. With this type of lock it allows the shutter to be locked or unlocked from inside or out.

All our doors, gates and window bars are fully compliant to BS EN 1324 1-1 (Industrial, Commercial, Garage Doors and Gates:-Product Standard) and CE Marked against the Construction Products Directive and also the Machinery Directive, a mandatory requirement in the UK.

http://www.arrowsecurityshutters.co.uk/

Fire rated steel doors

2011-01-24T06:07:00.000-08:00

Exit doors, Steel personnel doors or Fire Rated doors 1, 2, 3 and 4 hour fire rated doors, offer ideal security for both personnel access, heavy duty use and fire Rated Escape exit. The Fire Rated door-set options are single or double leaf and are all made to measure. Supplied in a standard colour RAL 7015 (Grey). Other Powder coat finished colours are available if required a surcharge will apply. Standard single Personnel doors are available from stock or single Escape Doors are also available in stock, and come complete with panic bolt. Doors are polyester powder coat finish as standard. The fire rated door-set leafs are of a thick composite construction comprising 1.25mm steel skins and a bonded honeycomb core infill. Each leaf is supplied with two high load, ball race hinges. The frame is constructed of folded steel section with butt joints. Each frame is provided with fixing plates welded into the frame for installation into conventional openings.

http://www.arrowsecurityshutters.co.uk/

PVC strip curtains

2011-01-17T07:54:00.000-08:00

PVC Strip curtains are so efficient that they will normally save their installation costs every winter. Thousands of these low cost, energy efficient products are in use by industries in Great Britain, saving millions of pounds in wasted heat, yet never impeding access.

Each door or curtain is designed to suit the prevailing weather conditions and your individual requirements. Lightweight strip with a small degree of overlap for internal pedestrian doors or heavy grade PVC with maximum overlap in most exposed doorways. In addition to their energy-saving properties, PVC screens can also be used to control the spread of airborne pollutants, dust, spray, fumes and noise

HIGH EFFICIENCY FEATURES
We supply arange of strip, sheet and hanging systems, guaranteeing that every customer can order precisely the right product, for internal or external use, for pedestrians or vehicular access and for any size of doorway or screen.

Features include the use of top quality extruded PVC strip with safe rounded edges, available in a wide selection of sizes, flexible twin track hanging systems, tough non-rust aluminium fittings and individual, independently hung strips to allow easy adjustment or replacement. Curtains can be mounted on sliding track to provide summer ventilation or access for fragile products.

With five strip sizes from 200mm x 2mm up to 400mm x 4mm, there is a strip to fit every application. Narrow, lightweight strip is most suitable for pedestrian use, because it is easy to push aside. Wider, thicker strip is more robust for vehicular use and is also more efficient for blocking draughts and heat loss. Heavier weight strip is particularly essential in exposed locations, where the effectiveness of lighter strip may be affected by strong winds

http://www.arrowsecurityshutters.co.uk/

Easy to fit bar and cabinet roller shutters

2011-01-10T08:12:00.000-08:00

Both attractive and practical, bar and cabinet roller shutter doors are designed to provide an optimum balance of security and visibility. They are also designed to rapidly convert an open space into a secure area, whilst at the same time enhancing and complementing its surroundings. Used extensively on bars, counters, receptions, kiosks and many other locations. These shutters utilise a compact, roller head plate box design to minimise space available. They allow easy operation by individual manual operation, electrically powered operation or group control from a single switch.

Spring & Lock Operated:
Shutters installed on the outside of the property, mainly over door entrances are raised up and down by hand. Spring loaded for easy of lifting. A key lock allows the shutter to be locked from inside and out

Electric Operated:
Electric motors are enclosed with in the tubular giving full protection from the elements. Operation can be with an internal rocker-switch, external security key-switch or with a remote control unit.

For spring & lock manual operated shutters a central key lock is used. This lock is built-in to the shutters bottom rail that is attached to the shutters curtain thus travels up and down with the shutter.

Locking bars locate in pre-drilled slots in each side of the shutters guide rails, giving maximum security. With this type of lock it allows the shutter to be locked or unlocked from either side of the bar area.

http://www.arrowsecurityshutters.co.uk/

Easy to fit removable security window bars

2011-01-04T07:08:00.001-08:00

Removable security window bars are an effective barrier and deterrent to crime. These stylish attractive bars are the solution for protecting windows and doors. The bars are constructed from tough, powder-coated steel, which are locked in place on the inside of the windows in either a vertical or horizontal format. Strong extruded aluminium retaining units secure each bar, yet the unique locking system means that they can be released in seconds. They are all made to measure and are ideal for homes, shops, clubs, schools, offices and factories.

http://www.arrowsecurityshutters.co.uk/

Easy to fit shop front roller shutters

2010-12-27T12:25:00.000-08:00

With the growing rate of vandalism and burglaries, many retail businesses suffer a substantial burden. Security shop-front roller shutters offer a more effective protection, balancing the demands of security and stylish appearance. A full range is available: galvanised steel, galvanised perforated steel, aluminium punched slotted. Each type of door offers a high level of security for your premises. All shop frontage shutters can be powder coated in our extensive range of colour finishes. Common modes of operation are manual lift or electric, using a high-security key switch. Electric roller shutter doors can also be operated by remote control.

http://www.arrowsecurityshutters.co.uk/

Easy to fit retractable security gates

2010-12-20T02:40:00.000-08:00

Retractable security gates are an effective barrier and deterrent to crime. These stylish attractive gates are the solution for protecting windows and doors. Safeguard your home and office with sliding interior security gates. They can be locked during the day without blocking the daylight. When opened, they can be stacked discreetly behind your curtains. A robust steel construction and multi-point locking system. Silent and smooth operation with colour finishes to suit your internal décor. They are all made to measure and are ideal for homes, shops, clubs, schools, offices and industrial premises.

http://www.arrowsecurityshutters.co.uk/

Easy to fit home security roller shutter doors

2010-12-13T04:45:00.000-08:00

Security shutters for your home provide an effective, physical barrier to deter intruders. With vandalism and burglary continuously rising, they offer peace of mind when premises are occupied or vacant. The shutters can be either installed internally or externally and are both operated from inside your home by swivel belt, manual push up and down or electric operated, each, allowing a quick exit in the event of emergencies. For exit doors or patio doors the shutter may be internally or externally opened via a central lock. Locking bars locate into the side guide rails. The neat finish of the security shutters is evident when fitted to your property with their unobtrusive roll-up boxes and maintenance-free powder coated standard colour finishes.

http://www.arrowsecurityshutters.co.uk/

EASY-TO-FIT ROLLER SHUTTER GARAGE DOORS

2010-11-29T09:40:00.000-08:00

Electrically-operated, roller shutter garage doors create extra space inside your garage. The quiet, vertical operation allows you to park your car up to the door. Press the button on the remote control, drive into your garage and at a second press of the button, the door closes and securely locks. The slim line remote control unit allows you to open your garage door from the comfort and security of your car.
All doors are available in a choice of low-maintenance, attractive colours. Every size of garage door opening can be accommodated - from single doors to oversize double doors. In the event of a power failure, an internal manual override handle allows you to open or close the garage door.

http://www.arrowsecurityshutters.co.uk/

Arrow Security Shutters - Introduction

2010-11-24T06:15:00.000-08:00

Hello

As a property owner you must be concerned about the growing rate of vandalism and burglaries and, no doubt, you have often considered more effective protection for your premises - OUR SECURITY PRODUCTS ARE THE ANSWER. Look at our prices on our web pages and decide for yourself. There is no pressure, no pushy salesperson to make up your mind for you. If you think this is a small price to pay for complete peace of mind, ring us now on 0800 633 5736. We will be happy to answer any queries that you may have.

Arrow Security Shutters Limited is one of the leading shutter door companies in the UK. (a family run company) We specialise in all types of security products; namely: shop-front shutters; retractable gates; removable security window bars; remote control roller garage doors; bar and cabinet shutters; industrial roller shutter doors; domestic shutters; PVC strip curtains; expandable barriers; personnel steel doors; steel exit doors; and steel fire-rated exit doors.

All our doors, gates and security products are fully compliant to BS EN 1324 1-1 (Industrial, Commercial, Garage Doors and Gates: Product Standard) and CE Marked against the Construction Products Directive and also the Machinery Directive - a mandatory requirement in the UK.

We look forward to hearing from you soon.

Andrew Burke,
Director
http://www.arrowsecurityshutters.co.uk/